Hycontrol Ltd.

Types of Level Measurement tools – radar, TDR, ultrasonic, thruwall, hydrostatic, plumbob, bypass and foam

Types of Level Switches – Float, rotary paddle, capacitance, admittance, vibrating probes of solids, tuning forks for liquids, microwave, foam and conductivity.

SILO Protection – a pneumatic conveying operation is necessary to prevent over-pressurization or over-filling. The pressure sensor, level sensor and the pressure relief valve alert on likely danger and ultimately provide relief of dangerous pressure. Monitoring the level and pressure allow other control functions to be activated such as:

  • High level alarm
  • High pressure alarm
  • Tanker fill pipe shut-off
  • Activate filter alarms
  • Alarm on a PRV event pressure
  • Provide filter blockage information
  • Provide valuable preventive maintenance info
  • Record the number of high pressure events
  • Record the number of PRV lifts
  • Record the number of near miss events

Fluid Components International LLC

Mass Flow Meters, Flow and Level Switches for Process Measurement and Automation. Rugged, accurate, repeatable superior quality designs have made FCI the leader in thermal dispersion mass flow meters, flow switches and level switches for industrial process measurement applications. FCI air and gas flow meters are applied from small dosing lines to the largest stacks.

  • Mass Flow Meters
  • Gas Flow Meters
  • Liquid Level Switches
  • Gas Flow Switches
  • Liquid Flow Switches

Tempsens Instruments (I) Pvt. Ltd.

  • RTDs (Resistance Temperature Detectors) – assemblies and sensor elements
  • Thermocouples – mineral insulated, base metal and precious metal elements
  • Thermowells and protection sheaths – metals & ceramic
  • Temperature sensing components and accessories

RTD’s – offer accurate temperature measurement from -200 Deg C to + 800 Deg C – Wire wound & Thin Film Sensors, Ceramic Encapsulated, Class A& Class B accuracy. Protection sheath SS316, SS304 and other grades and sizes from 3 mm to 15 mm and more.

Wire configuration -2-Wire, 3-Wire and 4-wire, Simplex and Duplex constructions – Sensor Elements have calibration & traceability to ASTM E585 / E 585 M – 01a, BS EN 60584-1 IEC 584, IEC 1515, ANSI / MC 96.1.

Thermocouples – Element Types: K, N, J, E, T, R, S, B, W. – Simplex, Duplex & Triplex, covering wide temperature Range 0 to 2350 deg C…

Sheath sizes: from 0.5 mm Dia to 12.7 mm Dia, Mineral Insulated – MgO, Al2O3
Sheath materials: SS316, SS310, SS321, Inconel 600, Molybdenum etc.
Sensor Elements have calibration & traceability to ASTM E585 / E 585 M – 01a BS EN 60584-1; IEC 584, IEC 1515, ANSI / MC 96.1

Thermowells – protect the basic sensor from mechanical damage, pressure and corrosion. Materials available are SS304, SS316, SS310, SS321, Inconel 600, Inconel 601, Inconel 625, Incolloy 800, Monel, Stellite, Hastelloy, Brass, etc

Wake Frequency Calculations are done in accordance with ASME PTC 19.3

Types of Thermowells:

  • Bar Stock Threaded (NPT, BSP, Metric)
  • Bar Stock Flanged
  • Bar stock Van stone
  • Bar Stock socket weld
  • Bar Stock welded-in bar stock ground joint
  • Bar stock clamp joint

Moor Industries

Temperature Transmitters, Sensors & Assemblies

Temperature transmitters allow you to take weak signals of low-level RTD or thermocouple temperature sensors, and convert it to high-level analog signals more appropriate for long-distance transmission through a loud plant, and prepared for direct interface with an indicator, recorder, PLC, DCS or PC-based SCADA system.


Signal Transmitters, Isolators & Converter

Convert, isolate, split, boost, and step down process signals so field instruments can interface directly with indicators, recorders, DCS, PLC, and PC-based SCADA systems. We provide a wide range of interface solutions


Katronic Technologies Ltd.

Specialized clamp-on ultrasonic flow meters and non-invasive process measurement instruments
manufactured with state-of-the-art electronics and sensor technology that are highly reliable and easy to operate.

The clamp-on ultrasonic flow meters of the KATflow series can measure on pipes of every common material and diameter.


Sensor Technology

Rotary Torque measurement solutions and sensors – exclusive technology for instrumentation, test and OEM markets, capable of measuring torque ranges from 10mNm to 13000Nm

Digital RWT310/320 Series torque sensors with integrated electronics and the digital RWT330/340 Series torque sensors with separate electronics include the latest non-contact TorqSense (SAW) technology. Also offer Optical and Strain Gauge technology torque transducers. TorqView, based on NI LabVIEW, is available as an easy to use Advanced Torque Monitoring software tool to assist data recording.

Customers can specify any full-scale torque range, within the standard range, to optimize accuracy. Included within the purchase is a free calibration for the first year and a Lifetime Warranty


Richards Industries

Popular brands of – Jordan Valve, Steriflow Valve, Low Flow Valve, Marwin Valve and Bestobell Steam Traps, various types of Pressure Regulators, Back Pressure Regulators, Temperature Regulators, Control Valves, and Sanitary Valves since 1940 under Jordan brand. “Sliding gate design” was first developed in 1947 by William Jordan.

2-piece, 3-piece flanged, 2-way, 3-way ball valves with actuators & accessories are manufactured under the brand “Marwin” and steam Traps under “Bestobell”.



A one-stop solution for major well known Instrumentation & electrical items from Siemens, ABB, E&H, Pepprel & Fuchs

Also manufacture level, flow and pressure sensors as well as transducers and encoders. Some of the most common products supplied are as follows:

  • Drives control units
  • Relays PLC, Encoder
  • Pneumatic valves, cylinders
  • Proximity sensors
  • Circuit breakers, mini power supply

Agar Corporation

Development, design, and manufacture of multiphase flow meters (MPFMs), oil/water meters, interface, emulsion & foam detectors, and hydrate detectors. Our solutions increase the efficiency of oil production and processing in applications such as heavy oil well testing, waste water treatment, automatic tank dewatering, desalters, emulsion & foam control, and hydrate detection where hydrocarbons and aqueous mixtures are present

Interface Detectors

The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam.

A wide range of models, process connections, and output options are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases.


Oil/Water Meters

Agar’s OW-200 series is a second-generation design, microwave based liquid/liquid analyzer developed by Agar Corporation after introducing the first 0-100% oil/water meter to the market in 1985. Our current design is the only device in which the accuracy of the measurement is not affected by changes in salinity, density, viscosity, temperature or velocity of the components being analyzed.


  • Crude Oil and finished pipeline monitoring
  • Oil in wastewater
  • Glycol and water
  • Aqueous/organic measurement

Multiphase Flow Meters

The AGAR MPFM is a non-nuclear, versatile, three-phase flow meter designed for true field conditions. It provides accurate, real-time measurements of oil, water and gas flows simultaneously without separation of the phases. Specially designed for low maintenance and ease of operation, they require no field calibration or prior knowledge of fluid properties (such as fluid density and salinity) to attain the specified accuracies. The real-time data capabilities of these meters allow for optimization of all types of critical production enhancement techniques.

Advantages of the Agar MPFM-50 series:

  • Gas void fraction 0-100%
  • Water-cut 0-100%
  • Not affected by flow regimes
  • High accuracy, real-time flow measurement
  • High and low viscosities
  • No nuclear (radioactive) sources
  • Compact, portable, and easy to transport and install
  • Wet gas application

Hydrate Detectors

Measurement of the water-cut and hydrate presence is performed by measuring the complex permittivity properties of the flow stream using the multiple high frequency method. This method will compensate for the effected of changing hydrocarbon composition and water salinity while providing two unique outputs, one for water cut, the second for hydrate concentration.

The presence of hydrates, within a pipeline, can severely impair fluid flow and requires regular pigging. Low Dosage Hydrate Inhibitor (LDHI) or methanol injection is used to minimize hydrate formation. By detecting the presence of hydrates, LDHI or methanol injection can be optimized.


Edibon International

Technical Teaching Equipments

Internationally renowned, more than 3000 patented Technical Teaching Units and 2800 different software packages for various fields of science.

Complete laboratory and Industrial Systems, based on several new Teaching Techniques like 3D Physics, Computer Aided Instruction (CAI), Real Time Control, Computer Control (SCADA), Photo-elasticity etc. The SCADA – NET System, in exclusive and extensive ranges cover:


  • Secondary education
  • Advanced physics laboratories


  • Technical and vocational education electronics laboratories
  • Higher education electronics laboratories


  • Technical and vocational education telecommunications laboratories
  • Higher education telecommunications laboratories

Fluid Mechanics

  • Fluid Mechanics Laboratories – Phase-1
  • Fluid Mechanics Laboratories – Phase-2
  • Fluid Mechanics Laboratories – Phase-3

Process Control

  • General Process Control laboratory
  • Process Control and maintenance training centre
  • Regulation, control and process control laboratory

Time Electronics

Design and manufacturing of calibration and metrology instruments.

  • Decade Boxes – Resistance, capacitance, and inductance
  • Portable Voltage and Current Test Equipment – Handheld and transportable calibrators, simulators, and sources
  • Portable Loop and Temperature Calibration Instruments – Handheld loop calibrators, RTD and thermocouple calibrators
  • Pressure Calibration Instruments – Calibration pumps, pressure calibrators, and digital gauges
  • Electrical Test Calibrators – Instruments for rapid calibration of electrical test equipment
  • Multifunction Calibrators 5025E, 5025C and 5051 – Precision calibrators for wide workload coverage
  • ATE/Bench Calibrators and Digital Multimeters – Programmable calibrators and benchtop DMMs
  • Calibration Benches – Comprehensive modular test benches and complete laboratory design
  • Calibration Software – For laboratory, office, and site calibration work


  • 4:00 pm February 08,2016
    Impressed current C.P. system for EWA- ground storage and elevated... read more...